TBC50-H TBC50-H - Industrial hot cutting machine
Technical specifications
The TBC50-H is an industrial hot cutting machine designed for the precise cutting of non-adhesive ribbons and materials such as straps, belts, sheaths, Velcro® or technical films.
Thanks to its HSS steel heating blade, it allows for clean cuts while sealing the edges of materials, thus preventing fraying. Fully programmable, it ensures rapid production of up to 140 pieces per minute.
Robust and reliable, the TBC50-H is perfectly suited to industrial environments requiring automated cutting of textile or synthetic materials.
| Product reference | TBC50-H |
|---|---|
| Maximum spool width | 90 mm |
| chuck diameter | 37 to 76 mm |
| Maximum coil diameter | 457 mm |
| Cutting length | 15 to 9999 mm |
Cutting speed | 120 to 140 cuts/min (for 50 mm) |
| Dimensions (W × D × H) | 800 × 370 × 480 mm |
| Weight | 21.3 kg |
Fiche produit complète
TBC50-H Industrial Hot Cutting Machine
The TBC50-H is an industrial machine designed for hot cutting of non-adhesive materials. It allows for clean and precise cuts while sealing the edges of the materials, thus preventing fraying.
Particularly suited to production environments, it allows for the automated cutting of technical ribbons and textile materials with high precision.
Hot cutting for textile and technical materials
The heated blade allows for efficient cutting of materials prone to fraying:
textile straps
technical ribbons
Velcro®
insulating sheaths
plastic films
synthetic materials
Hot cutting allows:
to seal the fibers
to achieve a clean finish
to avoid any degradation of the material
Programmable and automated cutting
The TBC50-H incorporates a programming system allowing you to define:
cutting length
the quantity of pieces
the blade temperature
Once programmed, the machine operates autonomously:
automatic unwinding
continuous cutting
stop at the end of the cycle
Fast and precise production
The machine offers a high production rate:
up to 140 pieces per minute (for a 50 mm cut)
Thanks to its stepper motor:
cutting accuracy of approximately ±1 mm
high repeatability
homogeneous production
Robust design for industrial use
The TBC50-H is designed for heavy-duty use:
robust structure
industrial components
stable operation
It integrates perfectly with:
production lines
industrial workshops
automated cutting stations
Compatibility and capacity
The machine accepts:
reels up to 457 mm in diameter
chucks from 37 to 76 mm
various non-adhesive materials
Key Benefits
Hot cutting with a clean finish
Elimination of fraying
Simple and automated programming
High production rate
Suitable for industrial environments
High-performing, precise and reliable, the TBC50-H is an ideal solution for industrial cutting of technical materials.
HSS steel heating blade
The machine uses a high-speed steel (HSS) heating blade which allows:
- cutting thick materials
- Seal the edges after cutting
- prevent fiber fraying
This system is particularly suited to textile or synthetic materials.
Roller pressure adjustment
The drive rollers have an adjustable pressure system.
This setting allows you to adjust the traction according to:
- the thickness of the material
- its rigidity
- its surface (smooth or thin materials)
Automatic stop at the end of the roll
The machine is equipped with a detection system that allows:
- to identify the end of the roll
- to automatically stop the machine
This function allows:
- to secure the use
- to avoid production errors
Versions available in the TBC50 / TBC-L range
The TBC50-H is part of the TBC range of industrial cutting machines:
- TBC50: Cold cutting for technical tapes and non-adhesive materials
- TBC50-H: Hot cutting to prevent fraying of textile materials
- TBC50-HX: Hot cutting with angled cut
- TBC50-S: Cutting machine with photoelectric sensor for label rolls
- TBC50-SK: version with sensor and automatic stacking
- TBC552-L: extra-large cutout up to 200 mm
- TBC553-L: extra-large cutout up to 300 mm
- TBC554-L: extra-large cutout up to 400 mm
This range allows the machine to be adapted according to:
- the width of the material
- the type of cut
- the level of automation
Advantages of the TBC50-H machine
The TBC50-H offers a high-performance solution for industrial cutting of non-adhesive materials.
Clean cut without fraying
Hot cutting allows:
- a clean finish
- a sealing of the fibers
- consistent quality
High productivity
The pace allows:
- rapid production
- an optimization of working time
- a reduction in handling
Simple programming
The system allows:
- precise length adjustment
- quantity management
- complete automation
Industrial robustness
The design guarantees:
- resistance to wear
- intensive use
- stability in production
Versatility
The machine is compatible with:
- textile materials
- technical films
- synthetic components
Productivity and performance
- Automated cutting
- high cadence
- constant precision
- loss reduction
Cutting of ribbons and textile materials
The TBC50-H is used for industrial cutting of many materials:
Velcro®
textile straps
belts
insulating sheaths
plastic films
technical tubing
Industrial applications
This machine is used in various sectors:
textile industry
industrial manufacturing
cable production
electronics industry
industrial assembly
Starting up and loading the reel
To use the machine:
Plug in the machine and turn it on
Adjust the blade temperature
Install the reel on the unwind bar
Orient the reel for unwinding from the top
Pass the tape between the guides and the rollers
Once the machine is configured, programming can begin.
Programming
The machine allows you to adjust:
the cutting length (LENGTH)
the quantity of pieces (Q’TY)
After validation of the parameters, the cutting starts automatically with the START button.
Interview
Handling heating blades and mechanical components requires precautions.
It is recommended to entrust the maintenance of the machine to the DERFI maintenance service in order to guarantee the safety and proper functioning of the device.
Spare parts
DERFI offers all spare parts for the TBC50-H, including:
heated cutting blades
drive rollers
electronic components
mechanical elements
To obtain a complete list of available parts, it is advisable to contact DERFI technical support directly.
For the integration of this machine, DERFI supports you
Possible maintenance
Video test with samples
Spare parts in stock
Exploded view and video supports
Request the product sheet
Thank you for providing your contact details to receive the product sheet.
Alternative products
These other products may interest you