TBC50-HX Industrial Oblique Hot Cutting Machine
Perform straight or angled hot cuts.
Technical specifications
The TBC50-HX is an industrial hot cutting machine with angular cutting, designed for the precise cutting of ribbons and non-adhesive materials such as straps, Velcro®, sheaths, ropes or textile ribbons.
Thanks to its HSS steel heated knife and angled blade, it allows for straight or oblique cuts, while sealing the ends of materials to prevent fraying.
Fully programmable and equipped with a stepper motor, the TBC50-HX guarantees high cutting accuracy and can reach up to 140 pieces per minute, making it an ideal solution for intensive industrial production.
| Product reference | TBC50-HX |
|---|---|
| Dimensions | 900 × 380 × 430 mm |
Maximum spool width | 100 mm |
Maximum coil diameter | 457 mm |
chuck diameter | 37 to 76 mm |
| Weight | 26.5 kg |
| Cutting speed | 120 to 140 cuts/min (for 50 mm) |
| Cutting length | 1 mm at 50 m |
| Type of cut | Straight or oblique hot cut |
| Main materials | Ribbons, straps, textile ribbons, Velcro® |
| Food | AC 110/220 V – 50/60 Hz |
Complete product sheet
TBC50-HX Industrial Cutting Machine
The TBC50-HX is an industrial cutting machine designed for hot cutting of non-adhesive materials, with the particularity of allowing straight cutting or angular cutting.
Thanks to its double knife system (straight and angled) made of HSS high-speed steel, it allows for clean cuts while sealing the ends of materials to prevent fraying.
This machine is particularly suitable for companies needing to quickly cut textile or synthetic ribbons with different cutting orientations.
Straight cut or oblique cut
The TBC50-HX allows for two types of cuts:
Straight cut for standard applications
Angled (oblique) cut for specific applications requiring a cutting angle
This feature is particularly useful in industries using technical or textile ribbons requiring a specific finish.
Hot cutting for textile materials
The heated blade allows cutting materials that tend to fray when cut cold.
It is used in particular for:
textile straps
technical ribbons
Velcro®
insulating sheaths
synthetic ropes
canvas ribbons
Hot cutting seals the fibers to ensure a clean finish.
Rapid and programmable production
The machine can achieve a speed of:
Up to 140 pieces per minute for a length of 50 mm.
Thanks to its stepper motor, it guarantees a cutting accuracy of approximately ±1 mm.
Programming allows you to define:
cutting length
the quantity of pieces
the blade temperature
Dual cutting system: straight or angled
The TBC50-HX is equipped with:
of a straight heated knife
of a angled heated knife
This system allows for straight or oblique cuts, depending on production needs.
HSS steel heating blade
The machine uses a HSS high-speed steel blade, known for its wear resistance.
This system allows:
to cut technical materials
to seal the ends after cutting
to prevent the fibers from fraying
Roller pressure adjustment
The pressure exerted on the feed rollers can be adjusted according to:
the thickness of the material
its rigidity
its surface (smooth or thin materials)
This setting ensures a stable unwinding and a precise cut.
Automatic stop at the end of the roll
The machine automatically detects when the reel is depleted.
It then stops automatically in order to:
protect mechanical components
avoid production errors
improve safety of use.
Versions available in the TBC50 / TBC-L range
The TBC553-L is part of the TBC range of industrial cutting machines:
TBC50: Cold cutting for technical tapes and non-adhesive materials
TBC50-H: Hot cutting to prevent fraying of textile materials
TBC50-HX: Hot cutting with angled cut
TBC50-S: Cutting machine with photoelectric sensor for label rolls
TBC50-SK: version with sensor and automatic stacking
TBC552-L: Extra-large cutout up to 200 mm
TBC553-L: Extra-large cutout up to 300 mm
TBC554-L: Extra-large cutout up to 400 mm
This range allows the machine to be adapted according to:
the width of the material
the type of cut
the level of automation.
Advantages of the TBC50-XC hot cutting machine
The TBC50-XC was designed to offer an automated, precise and adaptable cutting solution for non-adhesive materials in an industrial environment.
Clean cut without fraying
Hot cutting allows the material's fibers to be sealed immediately after cutting.
This process guarantees:
- a clean and neat finish
- the absence of fraying
- improved quality of the parts produced
Cutting flexibility
The TBC50-XC allows for different types of cuts depending on the needs.
It offers:
- straight cuts
- oblique (angular) cuts
- an adaptation to different industrial applications
This flexibility allows for a wider range of uses on the same workstation.
High productivity
The machine is designed to operate at a sustained pace.
It allows:
- to optimize production lines
- to reduce cutting times
- to ensure continuous and regular production
Simple programming
The TBC50-XC incorporates an intuitive programming system.
It allows:
- to easily define the cutting length
- to program the quantities to produce
- to automate cutting cycles
This simplicity reduces errors and makes it easier to learn.
Productivity and performance
- hot cutting of non-adhesive materials
- straight or angled cut as needed
- high precision cutting
- Automated programming
- suitable for intensive industrial production
Cutting of textile and technical materials
The TBC50-HX is used for cutting:
textile ribbons
Velcro®
technical straps
insulating sheaths
synthetic ropes
canvas ribbons
Industrial applications
The machine is used in many sectors:
textile industry
industrial manufacturing
technical assembly
electronics industry
cable production
Starting up and loading the reel
To use the machine:
Plug in the power supply and turn on the machine.
Adjust the blade temperature
Install the reel on the unwind bar
Pass the strip between the guides and the rollers
Program the length and quantity of cut
The cutting process then starts automatically.
Interview
Handling heated blades requires precautions.
It is recommended to entrust the maintenance to the DERFI maintenance service in order to guarantee the safety and longevity of the machine.
Spare parts
DERFI offers spare parts for the TBC50-HX machine, including:
HSS heating blades
drive rollers
electronic components
mechanical elements
To obtain a complete list of available parts, it is advisable to contact DERFI technical support directly.
FAQ
What does angled cutting on TBC50-HX allow?
What cutting system is fitted to TBC50-HX?
What roll width is compatible with TBC50-HX?
What lengths are available on TBC50-HX?
What cutting rate is specified for TBC50-HX?
Guides, tests, all our products in videos
User Guide
Our articles, advice and expertise
Find our guides
Deepen your knowledge to optimize your production lines.
Alternative products