TDA080-NM – TDA-NM range - Automatic dispenser for protective films

Non-marking automatic dispensers for protective films

The TDA080-NM and TDA150-NM are designed to meet the demands of industrial environments requiring intensive and repetitive use of protective films and technical tapes. Their non-marking design is a key advantage for sensitive surfaces.

These characteristics make it a particularly suitable solution for productions requiring precision, speed and clean handling.

Tools dedicated to industrial operations

The TDA080-NM and TDA150-NM are used in many sectors for:

• surface protection

• masking before treatment

• the marouflage

• industrial preparation

• technical film cutting

• repetitive operations on production lines

Solution suitable for sensitive surfaces

Another key aspect of these non-marking automatic unwinders is their ability to accommodate reels of varying sizes and materials, while preserving the integrity of the surfaces.

They allow:

• the use of reels up to 80 mm or 150 mm wide depending on the model

• the integration of large diameter ribbons and films

• better adaptation to production needs

• clean and secure distribution on sensitive surfaces

The majority of non-marking technical films and tapes are compatible with these automatic dispensers, with a particular affinity for protective films and masking tapes.

Simplicity and efficiency

The TDA080-NM and TDA150-NM are designed to offer:

• fast and even cutting of films and tapes

• a solution adapted to intensive production

• Ideal for use in protection, masking and industrial preparation

Versatile and robust, they provide a reliable solution for optimizing the distribution of protective films in demanding industrial environments.

Advantages of the TDA080-NM & TDA150-NM Non-Marking Industrial Automatic Unwinder

The TDA080-NM and TDA150-NM were designed to offer an automated, precise, and secure solution for dispensing protective films and non-marking tapes in industrial environments. Thanks to their specific rollers and various operating modes, they adapt to all production constraints.

Automatic unwinding and increased productivity

The main advantage of these industrial electronic unwinders lies in their automatic unwinding, designed to optimize production rates and reduce manual handling.

This automation allows:

• a reduction in labor for repetitive tasks

• an improvement in performance

• improved regularity of operations

• a reduction in downtime

Clean handling of sensitive surfaces

Thanks to their non-marking rollers, the TDA080-NM and TDA150-NM allow for smooth and reliable handling of materials without damaging surfaces.

This design allows for:

• to avoid marks on films and protected surfaces

• to guarantee a better quality finish

• to ensure clean and controlled handling

• to secure operations on sensitive materials

Four operating modes

The TDA080-NM and TDA150-NM offer four modes to suit all applications.

Manual mode

In manual mode, the operator has complete control over the unwinding of the tape or film.

• The tape output is controlled via the ADVANCE button.

• the length is adjusted manually

• The cut is triggered using the CUT button

This method is particularly suitable for one-off cuts or non-standard lengths.

Semi-automatic mode

In semi-automatic mode:

• The operator presses ADVANCE to advance the tape

• The cutting is done automatically when the button is released.

This mode offers an excellent compromise between speed and flexibility for repetitive operations of varying length.

Automatic mode

In automatic mode:

• The cutting length is defined via the digital setting

• all you need to do is retrieve the first tape or film

• The following ones are automatically delivered and cut.

This mode guarantees:

• perfect repeatability

• a significant time saving

• better standardization of lengths

Automatic mode with time intervals

This feature allows you to define a time interval between each distribution.

The dispenser automatically delivers a piece of tape or film at each programmed interval, for example:

• 10 seconds

• 15 seconds

• 20 seconds

This mode is ideal for multi-operation workstations or synchronized production rates.

Wide coil compatibility

The TDA080-NM and TDA150-NM accept reels up to 80 mm or 150 mm wide respectively, an important advantage for industrial surface protection applications.

This compatibility allows:

• an adaptation to numerous applications

• the use of protective films and wide tapes

• improved production flexibility

• easy integration into various industrial workstations

Cutting precision

The TDA080-NM and TDA150-NM provide a cutting accuracy of ± 1 mm, which varies depending on the type of material used.

This precision allows us to:

• improved cutting consistency

• a reduction of defects

• a decrease in recoveries

• a control of material waste

Key benefits for industrial production

• increased efficiency through automation

• precision and consistency of lengths

• Clean handling of sensitive surfaces

• enhanced security

• industrial durability

• easy integration into existing workstations

• better profitability

• flexibility of use according to production rates

Robustness and durability

The TDA080-NM and TDA150-NM are designed for heavy and prolonged use.

They offer:

• a robust structure

• operational stability

• good wear resistance

• an adaptation to daily industrial constraints

Reliable, precise and efficient, the TDA080-NM and TDA150-NM are an ideal solution for optimizing the distribution of protective films and non-marking tapes on intensive production lines.

Using the TDA080-NM & TDA150-NM Non-Marking Automatic Dispenser

The TDA080-NM and TDA150-NM are designed for the automatic and secure dispensing of protective films and technical tapes at production, preparation, and assembly stations. Their intuitive operation allows for quick implementation and use adapted to different work rhythms.

Power on

To start the device:

1. turn on the ON/OFF switch located on the dispenser

2. turn the device on

Inserting the roll of ribbon

1. Insert the roll of tape or film into the removable roll holder

2. It is possible to install up to two rollers simultaneously if necessary.

3. orient the end of the ribbon towards the feed rollers

Loading the ribbon

1. Place the end of the ribbon between the two feed rollers.

2. Press the ADVANCE key to advance the ribbon

3. position the ribbon correctly in the system

This step secures the ribbon and prepares the dispenser for dispensing.

Operating mode selection

Once the ribbon is loaded, select the usage mode appropriate for your application:

• Manual mode: the operator manually controls the unwinding and cutting

• Semi-automatic mode: dispensing is triggered manually, cutting is done automatically

• Automatic mode: the ribbon length is programmed via digital adjustment; dispensing and cutting are fully automated.

• Automatic mode with time intervals: the distribution of the ribbons is carried out automatically according to a defined time interval

Distribution process

Manual mode

1. Press ADVANCE to advance the ribbon

2. Press CUT to perform the cut

Semi-automatic mode

1. Press ADVANCE to advance the ribbon

2. release the key

3. the cutting is done automatically

Automatic mode

1. adjust to the desired length

2. retrieve the first ribbon

3. the following ones are automatically distributed with the same length

Interval Mode

1. set the desired interval

2. The dispenser automatically delivers the ribbons at the programmed times.

Extinction

Once the operation is complete:

1. Set the ON/OFF switch to OFF

2. turn off the distributor

Spare parts and maintenance

DERFI offers all spare parts for the TDA080-NM and TDA150-NM.

The technical department also provides:

• device maintenance

• component repair

• the supply of replacement parts

• the automated liner separation system according to needs

These services guarantee the longevity and optimal performance of your non-marking automatic dispenser in an industrial environment.