Home > Products > Label dispensers > Manual label dispensers > One-roll dispenser > DAD316
DAD316
The DAD 316 / 416 / 616 / 1016 / 1216 manual adhesive label dispensers are devices known for their versatility when it comes to the size of the rolls they can accommodate.
Made from rigid steel
Coil width from 316mm to 1216mm
Steel liner remover
Suction system
Ixable on tables and walls
Size of internal core up to 77mm
Light and mobile
Works for opaque or transparent labels
Label width (mm) :
DAD316 - Manual label dispenser for all roll widths
Request a quoteThese labellers are suitable for industrial use, specifically regarding the sticking of labels of all sizes.
Each model in the range corresponds to a different accommodation capacity regarding the width of the rolls of adhesive stickers and labels that can be used. Each of these 6 products is compatible with rolls of the following widths: 316 mm, 416 mm, 616 mm, 1016 mm and 1216 mm respectively.
Also, the DADs are distinguished from other hand-operated devices by the ingenuity of their liner separators which ensure the smooth flowing distribution of adhesive labels.
This manual dispenser is designed to facilitate the use of adhesive labels. It is very handy for the industrial operator that uses rolls of labels of all sizes in their tasks. Available in several sizes, the DAD 316 / 416 / 616 / 1016 / 1216 serves all types of uses. Not only is it very convenient for use in shipping areas but also in the food industry, especially when it comes to product packaging. It is also very useful in the sales departments. This is a standard packing label dispenser suitable with all types of labels and stickers intended for the shipping of parcels and packages.
In general, the products of the DAD range are ideal for industrial adhesive label application and for shipments.
The obvious advantage of the whole range lies in its diversity. Each product, from the DAD 316 to DAD 1216, can accommodate one or more rolls of labels. In ascending order, each of these manual label dispensers can accommodate a wide range of adhesive rolls and allow the simultaneous use of several rolls thanks to the different “slots” found on the device. The DAD 1216 can hold up to 5 rolls of adhesive labels. The ability to put so many rolls of labels on the same device can allow the user to choose which labels to use for specific applications without having to change dispensers constantly. In fact, rolls of labels of different sizes, types and colors can be made available on the same device. This feature can be very useful for the operator who requires multiple labels for the same product. No need to switch between different rolls or different dispensers. The DAD is a great time saving and space optimising device.
The other feature of the DAD 316 / DAD 416 / DAD 616 / DAD 1016 / DAD 1216 range is its mobility. DADs are lightweight and thus easily transportable. The ingenuity of these models is established in particular in their table or workbench fastening system. These label dispensers are equipped with powerful suction cups located under the base of each device, allowing the device to be held in place or repositioned very easily without having to screw or unscrew the DAD from a particular surface. This characteristic is very practical as it also allows for the device to be placed vertically on walls or side surfaces.
The DAD 316 / DAD 416 / DAD 616 / DAD 1016 / DAD 1216 are also very sturdy sticker dispensers. The entire range is made from hard steel that ensures the durability of the device.
However, the DAD range’s best feature is its liner removal system which enables the labels to be peeled from the liner. Guide rollers paired with a metal support structure, neatly and efficiently peel the labels from their protective liner. It is this system which allows for the quick and effortless dispensing of labels.
This adhesive sticker dispenser with suction cups is therefore the ideal instrument for the operator seeking comfort and efficiency in their work. The DAD is perfect for users needing to manipulate various adhesive rolls of different dimensions and patterns.
How to Use This Industrial Label Rewinder with Large Label Rolls ?
Once your DAD is installed and ready for use, simply pull on the protective liner strip. The distribution of labels will then occur autonomously, thanks to the liner separation system of the DAD 316 / DAD 416 / DAD 616 / DAD 1016 / DAD 1216.
Setup and Loading of the Roll
The installation of DADs varies depending on the model and their dimensions; however, the setup remains very straightforward and intuitive for each device.
For smaller models like the DAD 316, only one roll can be accommodated at a time. To install, grasp the central metal bar, insert a roll of labels, and place everything back onto the designated base. Then, guide the self-adhesive label strip between the drive rollers. Separate the adhesive dot from its protective liner so that the label is positioned above the metal drive roller. As for the liner strip, it should be directed towards the metallic label separator under the spiral bar, passing through the second yellow drive roller.
Your economical manual label dispenser is now ready for use.
For other products in the DAD range, the installation is similar to that of the DAD 316. The only difference will be the size of the rolls and the number of rolls to be placed on the label dispensing device. Larger devices are equipped with removable hubs that fit around the central metal bar, ensuring the stability of the rolls being dispensed.
Depending on the model, the drive rollers can be positioned at various locations on the device. However, the liner separator is identical across all models. The idea is to keep the label to be dispensed facing outward while guiding the liner into the recovery system, as shown in the demonstration video.
Some models also feature roll separators. Adjust their positions to accommodate the dimensions of your various label rolls, then apply the method outlined above to set up your adhesive rolls.
Please note that you can install your label dispensers on horizontal surfaces, tables, or workbenches, as well as on wall-mounted plans, thanks to the suction cups located beneath the device’s base.
Maintenance
The DAD 316 / DAD 416 / DAD 616 / DAD 1016 / DAD 1216 requires virtually no maintenance. Regularly clean any dust or adhesive residue from your device.
In the event of a malfunction, defect, or damage to any of your parts, please note that DERFI provides delivery and repair for all detachable parts of the DAD models.
Obtain the technical sheet
Receive the technical sheet by e-mail
Discover:
Our sales team will get in touch with you to help you find the best solution!