Transportable manual label dispenser for adhesive labels

Manual adhesive label dispenser for labels on rolls

This manual label dispenser has been designed to facilitate the handling of opaque and transparent adhesive decals. This sturdy labeller is easy-to-use and can easily be attached to table tops and workbenches.

Rigid steel build

Portable dispenser

Can be mounted onto table tops or workbenches

25mm core size

Outer diameter 150mm max

Roll width 50mm and 80mm

Can be mounted onto walls and other flat surfaces

Works for opaque or transparent labels

Label width (mm) :

The main advantage of this device is that it is easy-to-use thanks to its simple design. Once the device is loaded and installed, simply pull on the strip of liner to get a new label.

This simplicity of use is made possible thanks to a meticulous design allowing for the clean separation of stickers and labels from their liner paper during the dispensing of labels. This careful separation is accomplished due to the many different rollers functioning in the device.

Another feature of this manual dispenser for stickers is that it can be mounted onto a table top using the perforations intended for this purpose that are located on the base of the device. This **manual sticker dispenser ** can also be mounted onto other flat surfaces such as walls.

This manual label dispenser is also a very sturdy sticker dispenser. Made entirely from hard steel, the DLR 50 / 80 will withstand the test of time and wear and is suitable for intensive factory or workshop use.

Although the DLR 50 / 80 is very durable, it is a very lightweight and compact device. With a very light weight of 580 grams, this manual dispenser for adhesive labels is easily portable. In addition, the device will be very discreet on a work surface thanks to its small dimensions.

In addition, the DLR 50 can accommodate rolls of adhesive with a maximum width of 50 mm and a maximum outer diameter of 150 mm. As for the DLR 80, the latter will be able to support rolls whose width is less than or equal to 80 mm whos outer diameter does not exceed 150 mm.

This manual label dispenser is therefore the ideal instrument for a user or administrative agent that handles stickers of all sizes during their daily tasks. It is therefore suitable for both intensive industrial use as well as occasional use.

How to use this industrial tape dispenser for narrow adhesive rolls

Once the first label has been removed by the user, the device will automatically distribute the next label. Simply repeat the operation each time a new label is required.

Setting up and loading the roll of adhesive

Setting up and loading the roll of labels is very simple and intuitive. First, start by placing the roll of labels around the detachable support roller on the DLR 50, and on the base of the device for the DLR 80. Note that it is important to position the roll of labels so that the dispensing is done from the top of the roll. Then grasp the end of the strip of labels and place it on the guide rollers. First move the strip of labels under the first roller, then above the next one in order to finally bring it back under the last spiral roll as detailed on the presentation video. Then simply pull the liner and remove the label from it. The DLR 50/80 label dispenser is ready for use.

Maintenance

The DLR 50 / 80 requires practically no maintenance. Simply clean the label dispenser from time to time to eliminate dust and any possible glue residue, especially on the some of the rollers. This tape dispenser is designed to withstand the many hazards of intensive industrial production.

Spare parts

DERFI has all the spare parts for both the DLR 50 and DLR 80 label dispensers. We deliver all spares on request, simply contact us by email, telephone or via our website.