The first advantage of these adhesive lebel dispensers is revealed through their fully automated dispensing system. Indeed, the LD 8025 – 8050 – 8100 Labelmoto allows the autonomous distribution of adhesive labels in the sense that after each label is taken by the user, a new label is automatically delivered upwards, thus eliminating the need for the user to struggle with the labels and liner. This automation is the result of a very ingenious communication system between a photoelectric detection cell and a high torque motor.
This cell is equipped with sensitive sensors capable of detecting the presence of the labels to be dispensed. During each distribution, the detection cell orders the motor to stop rotating as soon as the liner appears under the sensor. When a label is retrieved, the system detects the blank liner strip and dispenses a new label.
In addition to the automatic release of adhesive labels, this photoelectric detection cell provides high dispensing accuracy. It is fixed on a pivot axis which allows the angle of the sensor to be adjusted. The user of the Labelmoto LD 8025 – 8050 – 8100 will therefore be able to determine the placement of the cell to best match the height of the label dispensed.
The other main feature of this adhesive label dispenser resides in its ability to automatically separate labels from their protective film. To do this, a separating blade installed on the device orients the label and liner in diametrically opposite directions, thus allowing a neat and clean separation of the two materials. This device also ensures the user a clean work space thanks to liner recovery system located on the dispenser. A liner roll is therefore created independently of the label discharge throughout the distribution process.
The Labelmoto LD 8025 – 8050 – 8100 is also an extremely fast labelling machine. These dispensers are known for their high discharge speed. Thus, the three models in the range correspond to three different distribution rates. The LD 8025 dispenses labels at a speed of 5.1 cm / sec, the LD 8050 at 10 cm / sec, and finally the Labelmoto LD 8100 at 19.8 cm of labels per second. This output speed is essential for the user whose activity requires the rapid handling of adhesive labels, and an automatic, repetitive and continuous dispensing of adhesive labels. By using the Labelmoto LD 80, the operator will increase the speed and efficiency of their productivity without any problems.
It is also important to note that the Labelmoto LD 8025 – 8050 – 8100 is an extremely robust electric dispenser for long adhesive labels. The latter was forged from anodized aluminum steel. This metallic structure considerably increases the durability of the device. The automatic device withstands the many stresses and strains that can be found on a mounting table or workbench without any problems. In addition, such a coating ensures the protection of all detachable parts of the LD 80.
Another special feature of dispensers is their versatility, in that they can accommodate rolls of labels of all sizes and materials. However, it should be noted that the LD 8025 – 8050 – 8100 Labelmoto is not compatible for use with transparent labels. The use of the range is reserved for opaque adhesive labels. This sticker dispenser is distinguished by the fact that it dispenses the adhesive labels from the top of the device. If this is not what you are looking for, we recommend consulting the classic LD6025 range.
Thus, as indicated in the table of technical characteristics above, the Labelmoto LD 8025 – 8050 – 8100 is compatible with adhesive label rolls ranging from 6 mm to 305 mm wide. As for the outer diameter of these rolls, the LD 80 ensures compatibility up to 305 millimetres.
The weight of the rolls can be a major obstacle when a stable, smooth and flawless distribution is required. This is why this labelling machine is equipped with a high torque motor. This feature allows Labelmoto LD 8025 – 8050 – 8100 labelers to dispense very heavy rolls while preventing a runaway of the dispensing and thus a too fast and irregular distribution.
Always in the interest of distribution stability, the LD 80 has an adjustable brake brush. This brush is used to adjust the pressure emitted on the label strip. The user of these adhesive sticker dispenser will have to adjust the pressure according to the size and weight of the different rolls of labels.
This will allow the industrial operator to use a wide variety of label rolls.
Finally, the latest quality of this electronic device for dispensing adhesive labels is displayed in the top-loading of labels. For long labels, it is more convenient to be able to pick them up by preforming a bottom-up movement. The LD 8025 – 8050 – 8100 Labelmoto therefore offers a real sense of comfort in order to lighten the industrial operator’s workload as much as possible.
This label dispenser is undoubtedly one of the most efficient and effective on the market. Not to mention its distribution rate, the Labelmoto LD 80 is a real investment in comfort and durability.