Using a handheld industrial dispenser for large adhesive tapes
DSH: Once the double reel is installed, grasp the ergonomic resin handle. Then place the output roll of the device on the desired surface, and start moving the device so as to unwind the adhesive film. Stop at the desired length and cut the double-sided tape with a simple movement towards the front of the device. The piece of tape will then cut off upon contact with the blade. If the manual double-sided tape dispenser is equipped with the guide roller option, the unwinding operation will need to be performed with both hands. With one hand, grasp the white ergonomic handle. Then grasp the guide lever to stabilize the tape output. This gesture remains similar to the traditional use, pull the tape to the desired length then proceed to the cutting. It is ideal to use the guide roller on the end of a table or workbench, so that the handle is not positioned on a rigid surface.
DSH MONO: The use of this manual dispenser is identical in every way to that of the DSH.
DSH TR: The DSH TR is used differently from the other two models in the DH product range. This dispenser is intended for the application of glue via transfer tape. It is therefore used by pulling the trigger provided on the device. To apply the adhesive, simply position the rubber drive roller on the desired surface. Then pull the trigger to start applying the glue on the manually marked path. Once at the ideal length, simply release the trigger and lift the** manual transfer ribbon reel**.
Inserting and loading the reel
DSH & DSH MONO: Place the double-sided or single-sided adhesive reel with protective liner on the hub provided for this purpose. Make sure that the output of the adhesive reel is from the top of the reel. Place the end of the tape so that it is level with the first drive roller. At this point, the adhesive tape will have to be separated from its protective liner. Grab the blank liner tape and wrap it around this first drive roller. Next, attach the liner film to the reel using the lateral slot located on the same reel. Then grasp the sticky tape and guide it to the rubber reel. Roll the adhesive under this roll and bring it back to the notched blade. Finally apply the adjustable brakes on the drive rollers. The DSH is now ready for use.
DSH TR: ** First, place the **roll of transfer tape around the main hub, taking care to position it so that the unwinding is in a counter-clockwise direction. Now, pull the tape back to the rubber reel and continue to pull it until the central collection roller from above the device is reached. Attach the adhesive to it using the slot provided on the roller, then apply the adjustable stopper according to the desired measurements. Next, use a pair of scissors or a cutter to separate the sticky strip from the protective liner at the roller output. The device is now ready for use. Please note that an extension can be added to manual dispenser as an option. This feature is perfect for applying glue on hard-to-reach surfaces.
Maintenance
The manual maintenance of these single-sided and double-sided adhesive tape dispensers is very superficial. All that is needed is to check the condition of the notched blade of the applicator. To clean the blade, occasionally apply detergent to the notches. This will prevent the accumulation of glue residue. To keep it sharp, regularly clean this blade with silicone oil.
Spare parts, repair and delivery.
DERFI offers repair and delivery of all spare parts for the DSH range.