The key advantage of this dispenser resides in its automation. This allows an autonomous and extremely precise distribution, with a tolerance between 0.4 mm and 1 mm.
Therefore, it is very easy for the operator to use pieces of adhesive tape of predefined and identical sizes, thanks to a length programming system.
To do this, the user of the BIMA A695 dispenser simply needs to press the programming button and input the desired length using the arrow buttons and digital display indicating the measurement.
The other great characteristic of this device is observed in its dispenser modes. Within this automatic adhesive dispenser, there are three modes of use: automatic mode, semi-automatic mode and unwinding mode.
The automatic mode
This mode has been designed to lighten the industrial operator’s task as much as possible. Thanks to a photoelectric detection cell, the unrolling of a second adhesive tape is done autonomously just after the recovery of the first piece of tape. The cell detects the removal of the first strip prior to releasing the next.
This mode only works when the programmable length function has been selected.
The semi-automatic mode
With this mode, the operator has more control over the process, which corresponds to less intensive production. Thus, the semi-automatic mode operates in conjunction with the programmed length selection. This way, once the tape has been taken, the ZCM1100 user will have to press the dispensing button in order for a new piece of tape to be dispensed.
The unwinding mode
Whilst using the unwinding mode, the automatic distribution of adhesive tape is once again limited. This mode is used outside the programmable length function. The operator will therefore decide visually, the length of adhesive tape they need by using the DOWN ARROW key. As long as this button is pressed, the adhesive roll will continue to unwind. When the key is released, the dispensing stops. It will then be necessary to press the SCISSOR key to proceed to the cutting.
The A695 not only features a high-performance automatic unwinding system, it also draws its originality from a highly sophisticated secure cutting system. Indeed, the automatic dispenser is equipped with a photosensitive detection cell that distinguishes objects other than the adhesive strips. It can detect fingers, tools, or any other material that differs from an adhesive tape. If one of these objects appears in the cutting line, the automatic dispenser immediately stops cutting.
Each part of the ZCM 1100 has therefore been meticulously engineered to produce an impeccable product.
Note that the ZCM1100 guillotine blade is made of reinforced steel. It has therefore been designed to remain robust and efficient despite intensive wear and tear. It will therefore maintain a perfect sturdiness for up to nearly 200,000 cuts. The characteristic of this blade is also observed in its guillotine cutting mode. The ZCM1100 guarantees its user a straight and perfectly clean cut.
This electric tape dispenser is also equipped with an adjustable pressure system. This feature allows the adjustment of the unwinding force of the adhesive rolls. Depending on the type or thickness of the adhesive used, its weight and unwinding speed can vary. The M1100 dispenser has a knob located above the cutting surface to regulate this pressure.
The casing is reinforced with a metal frame that guarantees resistance and sturdiness, while protecting the components it houses.
Furthermore, the automatic tape dispenser is covered with flame-retardant material. The device is therefore not flammable and thus meets the desired safety standards for industrial production.
Finally, the M1100 is very versatile when it comes to accommodating adhesive rolls of various types and sizes.
This automatic tape dispenser has a three-in-one transformable hub. Therefore, it is compatible with rolls with diameters of 25 mm, 38 mm and 76 mm. It can also accommodate rolls between 7 mm and 51 mm wide, with an outside diameter of up to 180 mm. With regard to the different types of adhesives, it is suitable for use with most adhesive rolls, single or double sided, except HBV and thick foam. Note that it is possible, as an option, to integrate a large roll support to offset a larger outside diameter into the ZCM1100.
This electronic dispenser distinguishes itself by its versatility, the quality of its materials, as well as the scope of its functionalities.