Using this automatic industrial label dispenser
Once installed, the Labelmoto is very easy to use. First, set the ON / OFF switch to ON. A first label will be dispensed. Take this first label. A new sticker will then be automatically released.
Starting-up the labeler and loading up a new roll
First, connect the unit to a power supply. Then place the roll around the hub so that it unwinds from the top of the roll. Then attach the black stabiliser cover to frame the roll, and start unrolling thetape. Grasp the head of the tape and guide it through the labelling surface under the brake brush. Pull a long strip of liner alone, and pass it under the distribution surface and position it on the liner recovery roller. Wrap the liner around the roller and lock the position by sliding the metal locking rod on the recovery roller. Then support the label film with the small black handle above the brush with a slight swivel. Finally, adjust the pressure of the dispensing according to the weight of the roll. To do this, grasp and turn the metal knob on the distribution axis. The user can also easily adjust the position of the photoelectric sensor according to the length of the labels to be recovered. The electric label dispenser is then ready for use.
Labeler cleaning & maintenance
This device is very resistant and does not require much maintenance and cleaning. Simply clean the dust off regularly according to the intensity of use of the LD3000 by means of a dry cloth.
In the event of a breakdown or malfunction, DERFI offers to send spare parts and repair the equipment.