> Dispensers > RT7000B

RT7000B

Automatic adhesive tape dispenser with battery for cutting tape to length

Automatic battery operated length adjustable adhesive taping machine

DISPENSER WITH ADJUSTABLE CUTTING LENGTH

PORTABLE WITH BATTERY

DESIGNED TO CUT 6MM TO 60MM TAPE

DISPENSES AND CUTS ALL TYPES OF ADHESIVES

MULTI-USE, PORTABLE AND STURDY

PROGRAMMABLE INDUSTRIAL TAPE DISPSENER

POSSIBLE PURCHASE OF BATTERY PER UNIT

USEFUL FOR POSITIONS WITHOUT POWER SUPPLY

Add to quote

Long awaited and finally available, DERFI has designed the first programmable length, automatic adhesive dispenser with battery. The RT7000 dispenser is particularly handy in work places where power outlets are not accessible or in cases where a portable dispenser is needed. The two batteries and two chargers supplied with each device allows for the continuous autonomy of the device no matter the rate of use. If necessary, additional batteries can be set aside to ensure use during three shifts. The variable length electronic tape dispenser is the same as the RT7000, with the exception that the RT7000B is fitted with a charger and an accumulator thus enabling the electric dispenser to be portable for use throughout the workshop.

Ask for the data sheet
PRODUCT REFERENCE
REEL DIAMETER (mm)
MAX ROLL WIDTH (mm)
MAX DIAMETER OF ROLL (mm)
WEIGHT (kg)
CUT LENGTH (mm)
RT7000B
Any
6-60 mm
until 300 mm
2.5 kg
20 cm/s

The main advantage of this battery-powered industrial dispenser is that it can be transported around the workshop. It is no longer necessary to equip all workstations with electrical power sources since this automatic tape dispenser is equipped with a battery. It is now possible to move this industrial dispenser from one station to another to cut strips of adhesive tape to predefined lengths. After having realized that this was an issue in many factories and workshops, DERFI technicians decided to develop a battery-operated, portable solution for cutting tape to length. It is now possible to use an electrical adhesive tape dispenser with programmable cutting lengths, anywhere, without having to take power sockets into account. Repeatedly cut strips of adhesive tape anywhere and without time constraints with this electronic tape dispenser whilst the spare battery is on charge. Another advantage of this device is that it dispenses strips of adhesive according to pre-programmed measurements. Used for cabling, leather, pharmaceutical, aeronautics and many other specific applications, this dispenser is designed to optimize the handling of adhesive tape in industrial production.

The main advantage of this device is that it offers the convenience of an electric adhesive tape dispenser without the hassle of power cords, as it is equipped with a battery. In order to diminish idle time, the second battery can be charged while this double-sided electric tape dispenser is being used so that the batteries can be swapped once the first battery goes flat. This variable length industrial tape dispenser is very easy to use and program since everything is displayed on the digital panel on the front of the device. Program, trigger and dispense strips of tape to the desired length either on demand or repetitively. Save time when handling pieces of double-sided tape or other types of adhesive tape (woven, cloth, aluminium, foam, PVC) even non-adhesive tapes like PTFE by using this dispenser. This tape dispenser is also good for cutting satin ribbon to particular lengths as well as other non-adhesive interleaving or protective films. With this A900 dispenser, the idea is to increase the production rate and reduce the waste of adhesive and non-adhesive films and tapes thanks to the ability to program cutting lengths. In addition, a separation plate is provided under the device and can be used to allow two 25mm wide (or less) tapes to be placed side by side. It is also possible to mount this dispenser that cuts tape to length RT7700 onto the battery for more freedom and convenience. For more details on this RT7700 model, check the description page of this model.

Setting up and loading the coil

One of the big advantages of this electric double-sided tape dispenser is that it does not require an interchangeable hub. Simply place the roll of tape or film onto the hub. Then, tighten the holding plates on either side of the dispenser to hold the roll in the centre of its device. Bring the end of the strip of tape to the drive roller and press the advance button to load the tape into the cutting system until it comes out at the end. Close the holding lock and program the device according to the desired cutting lengths.

 

How to use this automatic battery-powered tape dispenser

When using for the first time, let the replacement battery charge until the battery on the dispenser is empty. Wait until the dispenser completely empties the first battery before replacing it with the one being charged. A change in the sound of the device will signify the battery is flat. Also, when the battery runs out of power, the blade will no longer be able to cut the tape cleanly. The drive of the belt will also slow down significantly when the battery needs to be changed. The battery life varies according to the working rate and the mass of the adhesive tape that is passed through the cutting mechanism. Discharge the drained battery from its holder and place it on the charger that is connected to an electrical power outlet. Place the charged battery on the device’s holder and restart the programmable-cut adhesive tape dispenser. Resume working while one or more batteries are being charged. Refer to the instructions enclosed with the machine to use the different working modes.

 

Spare parts and maintenance

The automatic battery-powered adhesive tape cutting device includes: 1 RT7000 or RT7700 dispenser 2 batteries 2 chargers 1 base The care instructions for these devices are the same as with our other electrical tape dispensers. Refer to the pages corresponding to the dispenser in hand. Concerning the maintenance of the battery, remember to switch off the dispenser if it is not being used in three 8-hour shifts a day. Finally, once charged, do not leave the battery on the charger.

You want to get more info about this product ?

Ask for the datasheet

Frequently Asked Questions

What are the advantages of the RT7000B?
The RT7000B is an equipment developed by DERFI in order to allow the integration of an RT7000 on an industrial workstation not equipped with a mains connection.